Copyright ©Shenzhen FUJINTAI TECHNOLOGY CO.,LIMITED

2F Building C Feiteng Industrial No.8 Huanzhen Road 
Shajing 518104 , Shenzhen .China 

CONTACT

Fax:+86-755-27399893
E-mail: 
david@fujintai.com

Tel:+86-755-27392455
Website:  www.fujintai.com

标题

Classification

JUKI Long Board SMT Placement Machine JX-350

Classification:
Industry News
2020/05/04 21:39
Page view:
[Abstract]:
JUKI Long Board SMT Placement Machine JX-350

JUKI Long Board SMT Placement Machine JX-350

Expanded versatility for LED production and more!
JX-350 is now available with faster placement speed and improved placing ability

 

Features

Chip

32,000CPH chip (Laser centering / Optimum)

21,000CPH chip (Laser centering / IPC9850)

1. From 0603 to □33.5mmsquare components

2. JUKI laser centering for high speed, high accuracy placement

3. Improved placement quality

4. Alternate pick by screw-type nozzles* achieves high-speed placement for large component up to 25 mm diameter.

5. High-precision placement of diffusion lenses

6. Capable of up to 1,500 mm long board production, top class board size in industry.*

7. Various supply methods *

Features of the Laser Centering

JUKI’s original technology supports the high accuracy and high repeatability required for high density placement.

High accuracy, high-speed mounting

High-speed, on-the-fly centering

A high resolution laser is mounted on the head to center components in all directions including angle. Centering is done on-the-fly, allowing high speed placement of components from small chips to SOPs.

Adaptable centering

Centering accommodates component variations

Laser centering measures the components on the side. It is not affected by variations of component color or width/length so, unlike vision centering, there is no need to edit component data for different component vendors.

Component check function improves placement reliability

Since the laser is mounted on the head, it can be used to monitor the presence of components the entire time from pick to placement. This is difficult to accomplish with vacuum detection only. The placement reliability is also improved because the release of the component is confirmed after placement.

 

Specification

Board size

1time clamping

650mm×360mm

2times clamping

1,200mm×360mm

3times clamping *

1,500mm×360mm

Component height

6mm / 12mm

Component size

0603(0201) ~ □33.5mm

Placement speed (chip)

Optimum

32,000CPH

IPC9850

21,000CPH

Placement accuracy

±0.05mmCpk1

Feeder inputs

Front-side fixed mechanical
feeder bank(Standard)

Max.40 in case of 8mm tape

Front+rear-side fixed mechanical
feeder bank 
*1

Max.80

Front+rear-side fixed electrical
feeder bank 
*1

Max.160 *2

*1 This function is supported with an option.

*2 When using 8mm tape(on a Electric double tape feeder)